The Soft Start is a precision, solid-state controller, which sequentially switches on seven loads at l/2 second intervals. Individual switches, which the user may install, can select a combination of outputs. These switches may be used to turn the outputs on or off at any time. The Master Control switch starts the sequential switching when it is turned on. Likewise turning the Master Control switch off sequentially de-energizes the loads at l/2 second intervals. A plug-in connector simplifies installation.
Sequential switching of lamp loads is particularly important in vehicles with many lights. A Master Control switch that simultaneously energizes a large number of lights can momentarily reduce the vehicle's voltage. Similarly the simultaneous removal of these loads can cause high alternator output voltage transients, which may damage sensitive electronic equipment. The Soft Start sequencer assures that loads are applied and removed gradually, thus eliminating the possibility of inducing failures in the vehicle's equipment.
Specifications:
Ordering Information
| Outline Drawing:
|
Ludo McGurk Transport Equipment Ltd. Unit 3 Crossfield Road, Handforth, Cheshire, SK9
3LN, UK
E-Mail: ;
Tel: (+44) 1625 527673, Fax: (+44) 1625 549929
All details given on this website E & OE
