The Load Manager Mark II is a precision solid-state controller, which sequentially switches 8 self-contained relays at 1/2 second intervals. Individual switches, which the user may install, can select the combination of outputs. These switches may be used to turn the outputs on or off at any time. The Master Control switch starts the sequential switching when it is turned on. Likewise turning the Master Control switch off sequentially de-energizes the loads at 1/2 second intervals.
In addition the Load Manager Mark II monitors the vehicle's battery voltage. When electrical loads exceed the alternator output, the voltage drops. This is sensed by the Load Manager Mark II and the outputs are individually de-energized. Up to 5 outputs are controlled. Only as many are shut down as are required to maintain the system voltage. The shut down sequence may be altered by programming switches internal to the device which are accessible through a removable cap.
An indicator is included to signal when the Load Manager Mark II is active and when it is in the Load Reduce mode. The output relays which are part of the device have both normally open and normally closed contacts. This provides a variety of options for the installer.
Specifications:
Ordering Information
| Outline Drawing:
|
Ludo McGurk Transport Equipment Ltd. Unit 3 Crossfield Road, Handforth, Cheshire, SK9
3LN, UK
E-Mail: ;
Tel: (+44) 1625 527673, Fax: (+44) 1625 549929
All details given on this website E & OE
