 |  | |||
 |  |  | ||
 |  |  | ||
 | ||||
 | ||||
The Auto Eject prevents ripped out vehicle charging cables and improves response times by ejecting the connector when the vehicle is started. The Auto Eject is fitted as standard on many ambulances and fire appliances, and other vehicles where opportunity charging is required. The Auto Eject is available in 115V and 230V versions.
All mains-wired vehicles must contain an RCD, within the vehicle. Our compact, vehicle-mounted RCBO unit incorporates an RCD and a circuit breaker for greater electrical safety.
Our range of high-quality Kussmaul battery chargers is specifically designed to meet the demands of emergency and standby vehicles. For maximum battery life, intelligent battery monitoring ensures that the vehicle batteries are never over-charged or ‘cooked’, even when parasitic loads, such as vehicle radios, are active.
The CANPower Automatic Charge Divider controls alternator output to 2 or more battery systems. Easy to install, with features such as auto-seeking of source supply voltage in the event of a flat main battery, the Automatic Charge Divider helps you to get the best performance out of your existing battery systems.
The Safety Lock key-out engine running system is a simple, low-cost unit, which allows a vehicle engine to run with the ignition key removed. The driver can then leave the cab. If an attempt is made to drive away, the engine stops and cannot be restarted without the key.
CANPower Automatic Load Shedders monitor battery voltage, and shed their load if this drops below a preset threshold. Available with factory settings or with user-programmable voltage thresholds and time-delays. As members of the CANPower family, these devices can be easily reprogrammed in-situ using a laptop – no need to remove them from the vehicle.
Ludo McGurk Transport Equipment Ltd. Unit 3 Crossfield Road, Handforth, Cheshire, SK9
3LN, UK
E-Mail: ;
Tel: (+44) 1625 527673, Fax: (+44) 1625 549929
All details given on this website E & OE